Popular searches:Comet-SIP      Big-EYE-K10     Aydos-LEDBeam-150

Home    LED-Based Moving Head    Control

Control

Model: LJ-WDMXTR
Wireless DMX Transmitter&Receiver W-DMX Comparable
Inquiry now

Model: LJ-WDMXTR
Wireless DMX Transmitter&Receiver W-DMX Comparable
Wireless transmitter: just connect to the signal outlet of any DMX-512 controller, no need to connect any signal cable between the controller and the lighting equipment, the DMX-512 control system will be built between the controller and the controlled lightings. Each transmitter can control up to 512 receivers which can have up to 512 channels. Indoor use ONLY.

Details: 
Voltage: 110/230V 50/60Hz 
Power: 6 Watts
Wireless: 2.4G Wireless Solutions W-DMX 5G
Weight: 1kg(2.2 lbs)
Dimensions: 145x120x60mm(5.70" x 4.72" x 2.36")


Setting Up:
1. One transmitter, multi receivers

Turn all power switches on, all DMX indicator(s) should be off (If some DMX indicator is on or flash, press & hold the light’s FUNCTION button until it turns off); then press the transmitter’s FUNCTION button for one second, all the receivers will flash fast; then all get matched.

 2. Multi transmitters, multi receivers (e.g. 3 pair transmitter & receiver named A B C) have all power switches off.
1)  A pair power on, then follow the step 1 to get themmatched.
2)  B pair power on, then follow the step 1 to get themmatched.
3)  C pair power on, then follow the step 1 to get themmatched.

Disconnect the wireless transmitter
1  Press and hold the transmitter’s FUNCTION button for 5 seconds, the transmitter will disconnect with all receivers. The DMX indicators on receivers will beoff.

 
Building a DMX-chain:

Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected.


Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 ? resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture. 

Only use a stereo-shielded cable and 3-pin or 5-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another.

Products

Product Details